Search Now:
Products Order Status Compatibility Dealer Program Instructions Support

The following diagram and instructions are meant to assist you to refill your specific inkjet printer. Printed copies of these instructions are also included when you purchase one of our Inkjet Refill Kits. If you require additional assistance, please contact Surplus Inks directly online or by phone.

1. Assemble the syringe and filling needle and fill with ink. Hold cartridge with the filling hole upwards, insert the tip of the needle only through the "septum" rubber seal, and inject up to 40ml. of ink.
   IMPORTANT: Insertion too far may puncture the internal bladder of the cartridge.

2. Air bubbles must not be injected into the cartridge as they may cause irregular printing. If air is introduced it should be withdrawn by careful sucking with the syringe.

3. The cartridge should now be installed to the printer, and is ready for use.

4. Clean the syringe with water and dry for future use, or use with a different color ink.

Return to Index