Search Now:
Products Order Status Compatibility Dealer Program Instructions Support

The following diagram and instructions are meant to assist you to refill your specific inkjet printer. Printed copies of these instructions are also included when you purchase one of our Inkjet Refill Kits. If you require additional assistance, please contact Surplus Inks directly online or by phone.

The instructions below apply to standard capacity cartridges. See separate instructions for the high capacity Hewlett Packard part no. HP51626A.

1. Assemble the syringe and filling needle and fill with ink.

2. Hold the cartridge upright and push the needle through the filling hole into the centre of the cartridge. (Remove plug to filling hole on HP51633A)
   Note: The cartridge contains sponge and a slight resistance may be felt.

3. Slowly inject up to 15ml. of ink or until ink appears at the filling hole.

4. Stand cartridge, print head down, on absorbent paper for 2 minutes to draw out any excess ink and equalize pressure within.

5. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use. (Replace plug to filling hole on HP51633A)

Return to Index